![\"_mg_3537_dxo\"](\"https:\/\/ewnews.co.uk\/wp-content\/uploads\/MG_3537_DxO-300x200.jpg\")
<\/h5>\n<\/h5>\nElectrical contractors are under constant pressure to work smarter and more productively, adding more value to their customers as a way of differentiating themselves from competitors. Electrical wholesalers, therefore, have an important role to play in helping their contractor customers \u2018up their game\u2019.<\/p>\n
A good example of this is the opportunity to take advantage of structured wiring systems as an alternative to traditional cabling methods. The use of structured wiring with \u2018plug and play\u2019 connectivity has been shown to deliver significant savings in installation time. From the wholesaler\u2019s point of view, these products also provide a better margin than standard cabling products.<\/p>\n
Nevertheless, some traditionally minded electricians may need reassurance that structured wiring offers real benefits. So it\u2019s worthwhile pointing out that, based on dozens of different types of project, savings in installation time of 70% are typical when structured wiring systems are used.<\/p>\n
When this data is analysed intelligently, by taking into account the slightly higher capital costs of structured wiring compared to traditional wiring, there is still typically an average 30% saving on final installed cost.<\/p>\n
Whilst this is an average saving across all project types, there are some projects where the benefits are even greater. Obvious examples include high bay lighting in \u2018shed\u2019 type buildings where any work on the lighting will require specialist access equipment. In such cases, as well as reducing installation time and working at height, additional savings are achieved by minimising disruption of the operations at ground level.<\/p>\n
All of which contributes to improved margins for the wholesaler, enhanced productivity for the contractor and a better solution for the end customer. And there are also other benefits.<\/p>\n
For example, structured wiring systems enable contractors to make better use of their multi-skilled operatives. The plugs on such systems are configured so they can only be plugged in one way \u2013 the correct way. This means that a qualified electrician isn\u2019t required to make these connections. An obvious example is the use of mechanical operatives working at high level on pipework to also make the lighting connections.<\/p>\n
Of course, it\u2019s essential that connections at the board are made by qualified electricians but a simple plug-in operation is well within the scope of any multi-skilled operative.<\/p>\n
Clearly, it\u2019s important that there are benefits for the end customer if the contractor is to \u2018sell\u2019 this solution to them. Apart from the cost and speed of installation, structuring wiring also makes it easier to reconfigure the system as the building changes throughout its life.<\/p>\n
Rather than requiring a complete re-wiring to accommodate change, structured wiring has inherent flexibility that makes it very easy to reconfigure lighting or other small power. This means the building owner or operator can quickly adapt services to accommodate such changes as part of a \u2018continuous commissioning\u2019 strategy \u2013 supporting compliance with the government\u2019s \u2018Soft Landings\u2019 concept.<\/p>\n
The components of a structured wiring system can also be re-used, whereas with conventional wiring, there is considerable waste during a re-wiring project. Consequently, structured wiring helps to reduce waste, meet recycling targets and supports the sustainability objectives of designing intelligent buildings.<\/p>\n